Micsig Smart Series User Manual

General safety rules, terms, and symbols for safe operation.

Inspect package, use bracket, and identify device panels (side, rear, front).

Power, display, touch/mouse ops, probes, auto features, calibration, and settings.

Details on function buttons, navigation, cursors, trigger, homepage, and screen capture.

Moving, zooming, panning waveforms and using ROLL/XY/Zoom modes.

Open/close channels, adjust sensitivity/position, and access channel menus.

Set coupling, bandwidth limits, inversion, probe type, attenuation, and expansion reference.

Explanation of trigger function and basic adjustment principles.

Details on Edge, Pulse Width, Logic, Serial Bus, and other trigger types.

Performing automatic measurements, frequency metering, and using cursors.

Screen capture, video recording, and waveform storage methods.

Dual waveform calculations and FFT spectrum analysis.

Loading and displaying saved reference waveforms for comparison.

Adjusting waveform, graticule, persistence, expansion, color temp, and time base modes.

Sampling overview, acquisition control, modes, record length, and sampling rate.

Configuring trigger and decode for UART, LIN, CAN, SPI, I2C, ARINC429, 1553B protocols.

Oscilloscope app, App Store, Settings, File Manager, Calculator, Browser, Clock, Power.

Host computer, mobile app, FTP, and SCPI for remote operation and file transfer.

Updating software and adding optional functions via App Store.

Defines measurement categories and pollution degree for oscilloscope usage.

Diagnosing and resolving various operational, display, and performance problems.

Details on Micsig's warranty, repair services, and contact information.

Guidelines for general maintenance and cleaning of the oscilloscope.

Lists standard and optional accessories included with the oscilloscope.