Micsig Smart Series - Lin Bus Trigger and Decode

Chapter 12 Serial Bus Trigger and Decode (Optional)
225
(2) Area for decode data.
(3) ASCII code corresponding to the text data (when the data format is 9 bits and there is no parity bit, ASCII
code corresponds to lower 8 bits of data on the left side).
(4) Counter: Calculates the total number of frames and the percentage of ERR (parity error and stop bit error)
frames.
(5) Clear: Clear the counter data.
(6) Roller bar.
In the decode data area, the stop bit error data is displayed in yellow, and the decode error data is displayed in
red;
12.2 LIN Bus Trigger and Decode
For correctly decoding LIN bus data and making trigger stable, the bus configuration, trigger mode set and trigger
level need to be adjusted.