Store Menu If storing new scene
Store Menu When Overstoring
When storing a new scene there are no options available, the scene will be stored with the fastest cross fade
speed and the display will revert back to default.
When Overstoring an existing scene the following options are available.
OVERSTORE OVR/STOR The scene is over stored and display reverts back to scene number
XFADE The cross fade speed can be set from 0.1 to 100 seconds
PRCH Allows selection of the Program change the scene will respond
to between NONE, 000 to 127 ,when In Program changes
are enabled.
MIDI
44
To Next Page
Loading...
