To Next PageTo Next Page
Need help?Do you have a question about the Midas PRO2 and is the answer not in the manual?
General| Sample Rate | 96 kHz |
|---|---|
| Talkback | Yes |
| MIDI I/O | Yes |
| Computer Connectivity | USB, Ethernet |
| Processing | 40-bit floating point |
| Recallable Preamps | Yes |
| Channels | 64 |
| Matrix | 8 matrix buses |
| Display | 15" TFT display |
| Connectivity | Ethernet, MIDI |
| Type | Digital |
| EQ Bands | 4-band parametric EQ |
| Inputs - Mic Preamps | 8 XLR |
| Outputs - Main | 8 XLR |
| Effects | Reverb, Delay, Modulation, etc. |
| Dynamic Processing | Gate, Compressor, Limiter |
| Control Surface | Motorized faders, touchscreen |
| Power Supply | Internal |
Details the warranty period, terms, and conditions for the product's coverage.
Highlights the key features and capabilities of the PRO2 Live Audio System.
Outlines the basic steps required for setting up the PRO2 Live Audio System.
Provides instructions and considerations for installing the equipment.
Details the recommended procedures for powering the PRO2 system on and off.
Explains the fundamental patching function for routing signals and setting up devices.
Details the two monitor outputs (A and B) and their controls.
Explains how to configure the number of GEQs and effects in the PRO2.
Introduces the internal effects devices available on the PRO2.
Introduces PRO2 automation for scene and show file management.
Describes the automation controls on the control surface and GUI.
Explains the scene management areas within the Automation screen.
Explains how to use the scope feature for scene store/recall.
Describes the Recall Scope screen for selecting parameters for scene recall.
Details methods for selecting and deselecting scope parameters.
Details options for setting up virtual soundcheck.
Instructions for resetting console preferences and global settings.
Details how to set PRO2 operating parameters to suit user preferences.
Describes the areas on the control surface concerned with input channels.
Explains how input channels are displayed and navigated on the GUI.
Details the controls used for configuring input channels.
Details the compressor parameters and styles for input channels.
Describes the gate mode and its controls for input channels.
Explains how to configure insert send and return points for input channels.
Details the parametric EQ controls for input channels.
Shows the approximate signal path for each output type.
Describes the output channel areas on the control surface.
Explains how output channels are represented on the GUI.
Describes the combined dynamics and EQ sections for output channels.
Provides a visual flowchart of the GUI menu and its submenus.
Lists the main options available in the GUI menu.
Provides steps to diagnose and resolve issues with no audio output.
Explains how to interpret and resolve error messages related to PRO2 automation.
Details the components and meaning of error messages.
