Midas PRO2 User Manual

Programming events 189
PRO2 Live Audio System
Owner’s Manual
Next Opens the next scene on the PRO2. This scene is the same
one that would be opened if you pressed the next button.
Now Opens the ‘now’ scene on the PRO2. This scene is the
same one that would be opened if you pressed the now
button.
Note Off Informs the instrument to stop playing a note at a specified
pitch and velocity.
Parameters for Note Off are notes A0 to C7, with each
having a possible velocity of between 0 and 127. You can
also choose between Enable MIDI Byte 1 and Enable
MIDI Byte 2.
Note On Informs the instrument to start playing a note at a
specified pitch and velocity.
Parameters for Note On are notes A0 to C7, with each
having a possible velocity of between 0 and 127. You can
also choose between Enable MIDI Byte 1 and Enable
MIDI Byte 2.
Notes Event Using this option, you can displays notes that may be
useful at a certain point in the scene.
Pitch Wheel Use the pitch wheel to trigger the event. The pitch wheel is
a wheel type device, normally found to the left of a
synthesizer keyboard, that manipulates the pitch of a
played note(s).
Pressure Pressure applied to the key that is being pressed. This
affects, for example, the vibrato of the note being played.
Parameters are between 0 and 127. You can also choose
between Enable MIDI Byte 1 and Enable MIDI Byte 2.
Program n One of the 128 programs.
Program Change Changes the device to a particular patch/voice/preset etc.
Parameter are 0 to 127. You can also choose between
Enable MIDI Byte 1 and Enable MIDI Byte 2.
Scene Entry Triggers the event when a scene is opened.
Scene Exit Triggers the event when a scene is closed.
Scene Recall Triggers the event when the ‘now’ scene is reloaded, but
not jogged to.
Scene Entry And Exit Triggers the event when a scene is opened or closed.
Scene Entry And
Recall
Triggers the event when a scene is opened or the ‘now’
scene is reloaded (but not jogged to).
Scene Entry, Exit
And Recall
Triggers the event when a scene is opened, closed or the
‘now’ scene is reloaded (but not jogged to).
Static High External device is closed/switched off.
Static Low External device is opened/switched on.
X-Fade Event Lets you configure the crossfade event.
Parameter Description

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal