128 Chapter 16: Internal Effects
PRO2 Live Audio System
Owner’s Manual
Rack unit number allocation
Each unit position in the rack is allocated a rack
number that is recognised by the PRO Series
Live Audio System (shown right).
About the effect window
Similarly to the GEQ window on the GUI, the effect window shows a screen-width
version of the selected effect, which gives you full control of the effect via the trackball
and left and right buttons in the navigation zone. A ‘virtual’ assignable controls panel
below lets you select and operate the controls of the effect.
Effect window
Item Element Description
1 CHANGE DEVICE
TYPE button
Lets you select a different effect.
2 STORE PRESET
button
User library function button (see Chapter 24 "User
Libraries (Presets)" on page 235).
3 LOAD PRESET
button
User library function button (see Chapter 24 "User
Libraries (Presets)" on page 235).
4 CLOSE button Closes the effect window.
5 assignable
controls panel
See Chapter 19 "Assignable Controls (I Zone)" on
page 187.
To Next Page
Loading...
