Need help?Do you have a question about the Midas XL3 and is the answer not in the manual?
General| Group Buses | 8 |
|---|---|
| Digital Output | Optional |
| Dimensions | Varies depending on frame size |
| Noise | -90dBu |
| Type | Analog |
| Input Channels | 4 stereo |
| EQ | 4-band |
| Frequency Response | 20Hz - 20kHz |
| Power Supply | Internal |
Highlights console's flexibility for various audio applications.
Details the console's renowned equaliser and insert points.
Explains direct output routing and mix group functionality.
Features 22 outputs and a two-way matrix for flexible signal routing.
Describes the master section and its VCA control system.
Covers automute functions and the integrated communications system.
Provides a summary of key technical specifications.
Outlines the main configuration options available for the console.
Highlights the product's background and quality engineering.
Practical notes from Bob Doyle on operating the console.
Description of mix outputs and analog subgroup routing.
Insights from designers on console features and impact.
Details 48V Phantom, Mic/Line Pad, Earth Lift, Phase Reversal.
Details the Treble, Hi-Mid, Lo-Mid, and Bass equalizer bands.
Explains the High Pass Filter functionality and engagement.
Controls signal routing, pre-VCA fader, and VCA group assignment.
Assigns mute functions and enables solo/PFL listen.
Describes input metering and ST/Panpot functions.
Assigns module to VCA groups and controls signal via fader.
Enables VCA group placement and describes fader behavior.
Reverses phase and enables M/S microphone input.
Controls stereo width and assigns EQ to channels.
Switches bandwidth and assigns High Pass Filter.
Covers aux sends, ST assignment, and insert return.
Details VCA group assignment and stereo spectrum panning.
Describes dual output meters and direct input access.
Routes signal to matrix busses and places pan pots.
Controls level to masters and assigns output pre-fader.
Covers ST assignment, mute safety, talkback, and PFL.
Routes signal and mutes mix group outputs.
Controls mix group signal to XLR connectors.
Assigns module to VCA groups and enables fader activity.
Assigns faders to Grand Masters and controls VCA group level.
Describes metering, CHK function, and changeover switches.
Covers PFL/Solo, record level, and insert return functionality.
Explains master bus to matrix signal routing.
Covers solo latching switch and matrix output muting.
Controls the overall output level for each matrix.
Affects the Left or Right channel of the stereo buss.
Controls the overall master output level.
Controls actual mix group outputs and VCA fader activity.
Meters display level and ON engages rotary control.
Details call light, pink noise generation, and talkback features.
Cuts headphone signal and reconfigures prefader/PFL functions.
Controls headphone program level and local XLR outputs.
Controls mix group outputs and overall VCA group level.
1/4" jack for headphones and XLR jack for headset connection.
Specifies THD, crosstalk, and noise figures for inputs and system.
Details frequency response and system noise levels.
Specifies input/output level ranges and impedance values.
Details equaliser bandwidth and frequency range specifications.
References diagrams for input module connections and signal paths.
References diagrams for input module signal flow and phase.
References diagrams for the input module equaliser section.
Explains VCA and mute controls logic via diagrams.
Describes VCA output routing and mute signal paths.
Details the equaliser section and its controls via diagram.
Explains the channel level meter functionality.
Describes LED powering for switches via diagram.
Explains the direct output buffer functionality.
Describes dual input options and gain control.
Explains direct input to the group module.
Describes group mix input signal flow.
Details VCA and output routing.
Explains master and matrix signal assignments.
Explains mute control functionality.
Explains the output meter functionality.
Describes LED powering for controls.
Explains solo routing for groups.
Describes LED powering for switches.
Details remote volume control options.
Explains master output signal routing.
Explains matrix output signal routing.
Describes record output signal flow.
Explains the output meter functionality.
Describes LED powering for controls.
Explains the intercom system functionality.
Describes the talk facility functionality.
Explains the pink noise generator.
Details automute master controls.
Explains signal monitoring functions.
Describes the headphone amplifier.
Explains signal metering functionality.
Describes LED powering for controls.
Explains Grand Master VCA control.
Explains master/slave buffering.
Explains group master VCA control.
Describes channel VCA control.
Describes LED powering for VCA controls.
Critical safety warning regarding lethal voltages.
Steps for voltage change-over.
Details indicator module and regulator assembly.
Explains the 48V phantom power supply.
Details input and connector pin assignments.
Details input module options.
Details the XL302 Input VCA Control.
Details routing and output for XL310 Group Module.
Details automutes and solo select for XL310 Group Module.
Details remote volume option for XL310 Group Module.
Details buss and direct inputs for XL310 Group Module.
Details routing and output for XL310 Group Module.
Details automutes for XL310 Group Module CH.B.
Details remote volume option for XL310 Group Module CH.B.
Details mute link options for XL310 Group Module.
Details summing and master insert for XL322A Master Module.
Details matrix and record functions for XL322A Master Module.
Details master and matrix outputs for XL322A Master Module.
Details phones and local outputs for XL3 Comms Module.
Details comms and talkback for XL3 Comms Module.
Details talk, routing, OSS, and pink noise for XL3 Comms Module.
Details the headphone amplifier for XL330 Comms Module.
Details Grand Master VCA Control for MIDAS XL3.
Details Master VCA Control for MIDAS XL3.
Details Input VCA Control for MIDAS XL3.
Details power input PCB connections for XL2/XL3.
Details the jackfield layout for XL3 Mainframe.
Details motherboard wiring connections for XL3 Mainframe.
Details motherboard wiring connections for XL3 Mainframe.
Details connector pin assignments for XL3 I/O.
Details connector pin assignments for XL3.
Details meter bridge connector pin assignments.
Details meter bridge motherboard connections.
Details DC bus linking connectors for XL3.
Details input stages and component assignments.
Details the twin linear regulator for XL390 PSU.
Details PSU components and status display.
Provides a block diagram of the XL399 power supply.
Details XL390 power supply connector pin assignments.
Details power supply linking for XL390.
Details linking two consoles with XL390 power supply.
Details the switch mode block of the XL390 power supply.
To Next Page
