Need help?Do you have a question about the Midas XL200 and is the answer not in the manual?
General| EQ Bands | 4 |
|---|---|
| Phantom Power | Yes |
| Groups | 8 |
| Type | Analog |
| Bus Outputs | 8 |
| Aux Sends | 8 |
| A/D Resolution | Not Applicable |
| Sampling Rate | Not Applicable |
Lists various XL200 console models by name and input count.
Details input impedance, gain ranges, and maximum input levels.
Covers CMR figures, frequency response, and noise specifications for inputs.
Details summing noise and line-to-mix noise performance.
Details Hi pass filter, Treble, Mid, and Bass equaliser sections.
Covers gain control, line input selection, and EQ bypass switch.
Details the four-band EQ sections and variable HPF control.
Explains the eight auxiliary busses and PRE send selection.
Covers routing to subgroups, mix buses, and automute scenes.
Details mute, solo functionality, and the ten-segment meter.
Details the three-band stereo equaliser and variable HPF.
Explains gain, line input, and the specific EQ bands (Treble, Mid, Bass).
Explains eight auxiliary busses, including stereo pair selection.
Covers group assigns, mix routing, automute, and mute safe.
Details solo functionality, metering, and pan controls.
Assigns input channels to any of the eight VCA subgroups.
Describes the long-throw fader for smooth channel level control.
To Next Page
