Midas PRO X

(Visit midasconsoles.com for Full Manual)
Quick Start Guide
PRO X
Live Digital Console Control Centre and Audio System
Engine with 168 Input Channels, 99 Mix Buses and 96 kHz Sample Rate
A54-00001-28765

Midas PRO X Specifications

General

Brand	Midas
Model	PRO X
Category	Music Mixer
Language	English

Summary

Important Safety Instructions

Safety Warnings and Precautions

Compiles critical safety symbols, warnings, and numbered instructions for safe operation.

Basic Principles of Operation

Navigation

Navigating Input Channels

Explains how input channels are grouped into banks and displayed on the control surface.

Input Channel Controls

Details specific controls used for navigating input channels on the PRO X.

Input Channel Selection and Processing

Explains selecting input channels, processing areas, and navigating GUI screens.

Navigating Mix Buses

Explains how to navigate aux and matrix mix buses on the control centre.

Mix Bus Operations

Details methods to navigate, select, and process mix buses.

Navigating Output Channels

Describes how to navigate auxes, matrices, and masters among output channels.

Configuring Inputs and Outputs

Patching

Accessing and Performing Patching

Guides on accessing the Patching screen, procedures, snake type, and I/O rack setup.

Device Configuration

Explains AES50 Device Configuration and general device parameter setup.

Patching Methods

Details single patching and sequence patching operations for routing signals.

Basic Operation

Setting Input Gain and Filters

Guides on setting stage box/console gain and configuring high/low pass filters.

Input Equalisation

Covers using the EQ filters for treble, hi-mid, lo-mid, and bass adjustments.

Input Dynamics Processing

Explains setting up compressor and gate dynamics processors for input channels.

Output Processing and Groups

Mix Bus Setup and Configuration

Guides on configuring VCA/POP groups and setting up mix buses.

Mix Bus Mode Selection

Details how to select and set modes for mix buses (mix, group, mix minus).

Routing, Effects, and Automation

Covers mix bus routing, setting up effects, and managing automation and scenes.

Show and Event Management

Show File Management and CopyPaste

Surround Panning and Operation

Surround Panning Modes

Surround Setup Diagram

Two-Man Operation

System Setup and Configuration

Two-Man Operation Setup

Powering the System

Troubleshooting and Diagnostics

No Audio Issues

Provides checks for common causes of no audio output from the system.

Diagnostics Screen

Network and Master Controller Swapping

Technical Specifications

System Specifications

Audio Performance Specifications