40 PRO X
2. In the Surround Mode section, select the desired surround mode.
Two-Man Operation
The control centre can be operated by two people simultaneously. In this mode
of operation the 4-channel input bay is designated as area B, and operates
independently of the 12-channel input bay, which is always area A. (You can have
the same channel selected simultaneously in both bays.)
NOTE: This feature can also be used by a single operator if they require
somewhere to store important channels. In this case, area B can be used in
the same way a ‘channel 25’ would be used on an analogue console.
The diagram above shows the areas designated as A and B during two-man
operation and also shows the location of the area B button. All other parts of the
control surface are common to both areas.
Area A Area B
To Next Page
Loading...
Need help?
General
