EasyManuals Logo

Midas PRO2 User Manual

Midas PRO2
582 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
Pitch Shifter effect 137
PRO2 Live Audio System
Owner’s Manual
Pitch Shifter effect
The Pitch Shifter effect is a sound processing device for changing the pitch of an audio
signal without changing its duration.
Front panel of the pitch shifter effect
Item Control Function
1 COARSE control
knob
Adjusts the pitch shifting amount in whole tones.
Range is from -12 to +12, with 0 at top dead centre.
The numerical value is shown underneath.
2 FINE control knob Fine tunes the pitch shifting in 1% increments of a
whole tone. Range is from -100 to +100, with 0 at
top dead centre. The numerical value is shown
underneath.
3 PREDELAY control
knob
Sets the delay time before the pitch shift. Range is
from 1 to 500, with 22 at top dead centre.
4 FB DELAY control
knob
Sets the delay time on the feedback loop. Range is
from 1 to 500, with 22 at top dead centre.
5 FEEDBACK control
knob
Sets the amount of feedback (output fed back to
input) in %. For more details, see “Feedback” on
page 138. Range is from 0 to 100, with 50 at top
dead centre.
6 LEVEL control
knob
Sets the output level of the individual channel. Range
is from -40 to -10, with -20 at top dead centre.
7 PAN control knob Adjusts the position of the individual channel signal in
the unit's stereo output.
8 HF DAMP control
knob
Adjusts the HF attenuation of delay repeats. Range is
from 2k to 20k, with 6k at top dead centre.
9 HI EQ control
knob
Boosts/attenuates high frequencies. Range is from
-12 to +12, with 0 at top dead centre.
10 OUT LVL control
knob
Sets the overall output level. Range is from -20 to
+20, with 0 at top dead centre.
11 INPUT and
OUTPUT meters
Shows the input/output signal levels on dual
20-segment meters (-36dB to +21dB).
12 LF DAMP control
knob
Adjusts the LF attenuation of delay repeats. Range is
from 20 to 400.
13 LO EQ control
knob
Boosts/attenuates low frequencies. Range is from
-12 to +12, with 0 at top dead centre.
14 MIX control knob Controls the balance between dry signal and effect.
Range is from 0 to 100, with 50 at top dead centre.
1 2 3 4 5 6 7 8 9 10 11
151413127654321
16

Table of Contents

Other manuals for Midas PRO2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midas PRO2 and is the answer not in the manual?

Midas PRO2 Specifications

General IconGeneral
Sample Rate96 kHz
TalkbackYes
MIDI I/OYes
Computer ConnectivityUSB, Ethernet
Processing40-bit floating point
Recallable PreampsYes
Channels64
Matrix8 matrix buses
Display15" TFT display
ConnectivityEthernet, MIDI
TypeDigital
EQ Bands4-band parametric EQ
Inputs - Mic Preamps8 XLR
Outputs - Main8 XLR
EffectsReverb, Delay, Modulation, etc.
Dynamic ProcessingGate, Compressor, Limiter
Control SurfaceMotorized faders, touchscreen
Power SupplyInternal

Related product manuals