Midas PRO2 User Manual

282 Chapter 31: Output Channels
PRO2 Live Audio System
Owner’s Manual
Mixes
Each of the aux and master output channels can send a variable contribution to the
mixes on each of the eight matrix buses. The buses are controlled in pairs via mix
controls that give continuous adjustment (in the range +6dB to off) of sub group levels
sent to matrix mixes. The controls in the mix section (mix and master bays) include
level/pan and level control knobs for each bus pair, whose function (auxes only)
depends on the current bus mode in operation.
The mixes on the outputs are similar in functionality to inputs, except there is no after
fader listen. For details, see “Mixes” on page 259.
Masters
Towards the bottom of each input fast strip are the masters section and pan control,
LCD select button, mute and solo, and the input fader.
For each output, the masters section (mix and master bays) functions in the same way
as for the inputs. For more information, see “Master controls” on page 261.

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal