18 Chapter 3: About The PRO2 Control Centre
PRO2 Live Audio System
Owner’s Manual
PRO2 control surface
During show time the functions that require fast access are controlled by control knobs
(rotary encoders), pushbutton switches, faders etc. More complex functions that do not
require this fast access are controlled via the GUI screen using the trackball and left and
right navigational keys.
Main areas of control surface
Item Description
A
Channel detail areas Contains detail areas, such as the D-zone
(dynamic), E-zone (EQ) and mix buses, that provide a more comprehensive
control of a channel or mix bus by allowing detailed audio parameter
adjustment. Includes mix bus navigation controls.
B
Outputs The output controls are limited to basic switch functions, such as,
mute, solo, talk and select, along with signal metering, so that all 24
outputs can be shown at the same time. Outputs can be assigned to
channel or mix bay faders. The selected output with be assigned to the
"selected mix" fader on the master bay. The output area does not require
any direct support from the GUI.
C
Comms Talk, solo, headphones, etc.
D
Advanced navigation controls For activating advanced navigational
functions, such as flip, MCAs and GEQ.
E
I zone Operator-assignable device controls.
F
Automation and USB Scene store/recall and USB connection.
To Next Page
Loading...
Need help?
General
