Midas PRO2 User Manual

381
PRO2 Live Audio System
Owner’s Manual
Appendix G: Parameters Affected By
Automate Patching
This appendix shows the patching parameters (sources) that can be changed on a
per-scene basis in automation. These are only selectable when the Automate
Patching option of the Preferences scene is selected (see “Using patching in
automation” on page 171).
Inputs
The following input channel sources can be changed per scene.
Although the mic input and tape input sources are
automatable, that is, they can be changed per scene,
they are controlled by the input patching recall scope
area switch (see Figure 30, “Parameter sections per
input channel,” on page 339). They are not affected
by the Automate Patching function.
Item Parameter
1 Insert return source
2 Compressor side chain source
3 Gate key source
Insert detail area Compressor detail area
1
2
3
Gate detail area
Input patching recall
scope area switches

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal