Crossfade groups 195
PRO2 Live Audio System
Owner’s Manual
Note: The graph display shows the current longest crossfade in progress. So, if a
delayed crossfade starts during the current one, and it is longer than the current one,
the graph will change to show the new crossfade.
You can manually override the crossfade using the controls in the automation section of
the output bay (see “Manually controlling a crossfade” on page 198).
Crossfade groups
Crossfade groups let you choose which channels/buses/groups will contain the
crossfade. These groups are managed at the GUI’s Crossfade Groups screen.
Crossfade Groups screen
Item Description
1 Crossfade control group member source panel. Contains panels of
channels, buses and groups from where you select the sources for your
crossfade group.
2 Crossfade group management section, where you can create new crossfade
groups or delete existing ones, add/remove members to/from the currently
selected group, and select the desired group from the Control Group List.
3 Crossfade group member panel.
4 ADD and REMOVE buttons. These buttons add or remove the currently
selected members to or from the Control Group Member List,
respectively.
5 New, Rename and Delete buttons. These buttons let you create, rename
or delete crossfade control groups, respectively.
6 Control Group List, which shows the existing crossfade control groups.
7 Control Group Member List, which shows the current members of the
selected crossfade control group.
8 ALL and NONE buttons. These buttons select all or none of the members
in the Control Group Member List, respectively.
To Next Page
Loading...
Need help?
General
