Midas PRO2 User Manual

431
PRO2 Live Audio System
Owner’s Manual
Appendix I: Parameters Affected By
Copy And Paste
This appendix shows the input and output channel parameters affected by copy and
paste operations, which are selected via the copy and paste buttons on the GUI (see
“Using copy and paste” on page 87).
The structure of this appendix is intended to follow the way that copy and paste
operates, that is, by channel or detail area.
Overview
The following table provides a quick reference for finding the copy and paste
parameters per channel in this appendix.
Control
area
Inputs Auxes Returns Matrices Masters
Config-
uration
“Configuration
” on page 432
“Configuration
” on page 440
“Configuration
” on page 446
“Configuration
” on page 449
“Configuration
” on page 455
Comp-
ressor
“Compressor”
on page 433
“Compressor”
on page 441
N/A “Compressor”
on page 450
“Compressor”
on page 456
Gate “Gate” on
page 434
N/A N/A N/A N/A
EQ
(GEQ)
“EQ” on
page 436
“EQ (GEQ)” on
page 442
N/A “EQ (GEQ)” on
page 452
“EQ (GEQ)” on
page 458
Bus
sends
“Bus sends” on
page 438
“Bus sends” on
page 444
“Bus sends” on
page 447
N/A N/A
Master
routing
/fader
section
“Master
routing” on
page 439
“Master
routing” on
page 445
“Master
routing” on
page 448
“Fader section”
on page 454
“Master
routing” on
page 460

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal