104 Chapter 12: Soloing
PRO2 Live Audio System
Owner’s Manual
Table 4: Solo A destination controls
Solo B
The solo B buttons are located next to the individual solo buttons (GUI only). With
solo B on, solo goes to the B bus and with solo B off, solo goes to the A bus. Solo B has
separate ADD, CLEAR and PFL controls that, in broadcast mode, can be used to
control those functions independently of solo A.
Control Options Description
PFL direct input - Direct inject to solo A from linked
console, active only while solo A is PFL.
AFL direct input - Direct inject to solo A from linked
console, active only while solo A is AFL.
Solo add • On (additive solos)
• Off (self-cancelling
solos)
Disable self-cancelling solo A solos.
(When self-cancelling solos are
selected, that is, with solo add mode
off, the solo being cancelled will be
deactivated before activating a new
solo.)
Solo clear • On (some solo A
solos)
• Off (no solo A solos)
Single button clearing of currently
active solo A solos.
Solo PFL • PFL (solo pre-fader)
• AFL (solo after-fader)
Switch all current and future solo A
activations to send the solo A bus pre-
fader.
Solo in place
(SIP)
• On (SIP active)
• Off (SIP inactive)
When active, SIP uses the console’s
master outputs for the solo A material.
It does this by muting all input channels
that are not currently soloed to the solo
A bus.
It is not possible to activate SIP
accidentally. The SIP button has a
hinged clear plastic cover that has to
lifted up before the button can be
operated.
For SIP purposes, master outputs can
be the main master bus or, if
configured, a multi-channel output mix.
To be eligible for SIP muting, channels
must be input channels and set up to
solo to the solo A bus; channels with
any other combination are not
subjected to SIP muting.
Channels eligible for SIP muting that
are currently, or subsequently, muted
by a means other than SIP (that is,
local button press, auto-mute or scene
recall) remain muted regardless of the
SIP status. On removal of the
overriding mute, the mute is restored
according to the current SIP status.
To Next Page
Loading...
Need help?
General
