Midas PRO2 User Manual

GUI screen layout 39
PRO2 Live Audio System
Owner’s Manual
Status bar
The Status bar, which is always displayed at the top of the GUI screen, contains a
number of elements as shown in the following diagram.
GUI cross-hair
The GUI uses a ‘cross hair’ configuration
(shown right) to show which channel is
currently selected in the channel fader
section and also its current detail area
selection.
The detail area can show an output,
while the main area displays input
channel overviews, and vice versa.
You can navigate the eight channel
faders to show output channel
overviews.
Item Description
1 home button, opens the GUI menu (see “GUI menu flowchart” on
page 284).
2 Screen navigation buttons (see “To find a GUI screen that you recently
opened” on page 46).
3 Name of current screen.
4 “Not Saved” message appears when the scene/preset library file contains
changes that have not been saved.
5 Title of currently selected scene, if any.
6 Tap Tempo section, which shows the current tap tempo time (ms).
7 Copy and paste buttons (see “Using copy and paste” on page 87).
8 User library buttons (see “User library (presets)” on page 88).
1 2 3 4 5 7 86
Detail
area
Status bar
Main area

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal