Mic amp input gain (preliminary input processing) 247
PRO2 Live Audio System
Owner’s Manual
Using gain swap
Operating the gain SWAP button,
swaps the function of the gain
control (top of input fast strips)
between that of the digital trim and
stage box gain. In addition, if the
Fast Zone Delay Control option
(see “Setting the user interface
preferences” on page 209) is
enabled, input delay is also
included in the swap.
Always check the GUI for ‘swap’ status.
Processing order
This section has a C/O switch that changes order of processing from EQ/INS/DYN
(default) to DYN/INS/EQ and vice versa, which is shown in the GUI channel strip.
To Next Page
Loading...
