Monitors (A and B) 111
PRO2 Live Audio System
Owner’s Manual
Delay (GUI only)
You can delay each monitor output signal (A and B) individually by up to
500 milliseconds (ms). This is done via the two delay sections in the Monitors screen.
This function does not have support on the control surface.
Monitor A and B delay sections on the GUI
11 left and right meters for the monitor (A or B) currently assigned to the
monitor section on the control surface.
12 Left monitor signal. On the control surface, it is the left monitor signal of
the current monitor assignment (A or B).
13 Right monitor signal. On the control surface, it is the right monitor signal of
the current monitor assignment (A or B).
Item Element Description
1 Control knob Adjusts the monitor output signal delay in the range
0ms to 500ms.
2 Up/down spin
buttons
Provide finer adjustment of the monitor output signal
delay.
3 ON switch Switches the delay on/off.
4 Two delay value
fields
Show the current delay value in milliseconds (ms)
and metres (m).
Item Description
To Next Page
Loading...
