Midas PRO2 User Manual

110 Chapter 14: Monitors And Communications
PRO2 Live Audio System
Owner’s Manual
Figure 9: Monitor A and B strips
Item Description
1 Monitor a strip on the GUI.
2 Monitor b strip on the GUI.
3 monitor a/b strip on the control surface. For controlling current monitor
assignment (A or B).
4 This MUTE button mutes the right monitor signal. On the control surface, it
mutes the right monitor signal of the current monitor assignment (A or B).
5 This MUTE button mutes the left monitor signal. On the control surface, it
mutes the left monitor signal of the current monitor assignment (A or B).
6 This DIM button dims the monitor signal output level by 20dB on monitor
speakers. On the control surface, it dims the monitor signal of the current
monitor assignment (A or B).
7 C/O switch that switches control of the monitor’s fader and mute to
monitor B.he C/O (to fader) switch (control surface only) swaps control of
the solo A to fader.
8 Fader for control of monitor A or B speaker level from -∞ to +10.
9 left and right meters for monitor a (GUI only).
10 left and right meters for monitor b (GUI only).
9
13
4
7
8
12
11
5
4
5
8
6
6
12
10
3
13
12

Midas PRO2 Specifications

General

Sample Rate	96 kHz
Talkback	Yes
MIDI I/O	Yes
Computer Connectivity	USB, Ethernet
Processing	40-bit floating point
Recallable Preamps	Yes
Channels	64
Matrix	8 matrix buses
Display	15" TFT display
Connectivity	Ethernet, MIDI
Type	Digital
EQ Bands	4-band parametric EQ
Inputs - Mic Preamps	8 XLR
Outputs - Main	8 XLR
Effects	Reverb, Delay, Modulation, etc.
Dynamic Processing	Gate, Compressor, Limiter
Control Surface	Motorized faders, touchscreen
Power Supply	Internal