DECLARATION OF CONFORMITY
We,
of, Klark Teknik Building, Walter Nash Road, Kidderminster, Worcestershire, DY11 7HJ.
Declare that a sample of the following product:-
to which this declaration refers, is in conformity with the following directives and/or standards:-
Klark Teknik Group (UK) Plc
Product Type Number Product Description Nominal Voltage (s) Current Freq
A Subsidiary of Telex Communications, Inc.
V190 External Linear 100V AC, 120V AC 4.3A, 3.7A 50/60Hz
Power Supply 220V AC, 240V AC 2.1A, 1.95A
Signed:............................ Date: 27th February, 2004
Name: Simon Harrison
Authority: Research and Development Director, Klark Teknik Group (UK) PLC
Attention!
Where applicable, the attention of the specifier, purchaser, installer or user is drawn to special limitations
of use which must be observed when these products are taken into service to maintain compliance with
the above directives. Details of these special measures and limitations to use are available on request
and are available in product manuals.
Klark Teknik Group (UK) Plc, Klark Teknik Building, Walter Nash Road,
Kidderminster. Worcs. DY11 7HJ. England
Tel:+44 1562 741515 Fax:+44 1562 745371
www.midasconsoles.com www.klarkteknik.com
Directive(s) Test Standard(s)
Generic Standard using EN55103 Limits and Methods
Class B Conduct Emissions EN55103
Class B Radiated Emissions EN55103
Fast Transient Bursts EN61000-4-4
Static Discharge EN61000-4-2
Electrical Safety
EN60065:2002
UL60065-03
CAN/CSA60065-03
IEC60065-2001
Pending
Pending
Pending
To Next Page
Loading...
Need help?
General
