How to troubleshoot a Middleby Marshall Oven with no display on the controller?
If nothing is displayed on the controller of your Middleby Marshall Oven, start by checking if the oven is properly connected to a power source by checking the plug at the wall. Next, verify that the main breaker is turned on. Lastly, inspect the control circuit breaker to see if it has tripped and reset it if necessary.
What does 'RESET IGNITION' mean on my Middleby Marshall PS360G Oven and how do I fix it?
If you see “RESET IGNITION” on the display of your Middleby Marshall Oven, it could be due to a gas supply issue. Ensure that the manual gas valve supplying the oven is turned on. If the burner has stopped running, try turning the oven off and then back on to clear the notification and relight the burner. If the problem continues, arrange for service.
What to do if the conveyor is not moving on my Middleby Marshall PS360G?
If the conveyor on your Middleby Marshall Oven isn't moving, there are several potential causes. First, check for any obstructions jamming the conveyor and remove them after turning the power off. Second, examine the circuit breaker, located on the right side control door, and reset it if it has tripped, making sure to inspect the conveyor for any jamming. Finally, if the chain has come loose from the sprocket, turn the power off, remove the chain cover, replace the chain onto the sprocket, and then reattach the chain cover.
Why is my Middleby Marshall PS360G not baking properly?
If your Middleby Marshall Oven isn't baking properly, it could be due to incorrect settings. Verify the time and temperature settings to ensure they are accurate. Another potential cause is kitchen airflow conditions affecting the bake. Try to eliminate any air cross-currents in the area around the oven.
Why is the conveyor speed wrong on my Middleby Marshall Oven?
If the conveyor on your Middleby Marshall Oven is running at the wrong speed, the time settings may have been altered. Confirm that the values are correct and adjust the control settings accordingly.
What to do if my Middleby Marshall Oven doesn't enter BAKING mode?
If your Middleby Marshall Oven does not enter BAKING mode when product is placed on the belt, it might be due to a malfunctioning photo eye. As a temporary solution, enter the BLOWER CONFIGURATION menu (manager access) and turn Energy Mode to OFF. This will make the oven run in BAKING mode continuously. Schedule a service repair to fix the photo eye.
Why is the control display dim on my Middleby Marshall PS360G?
If the control display on your Middleby Marshall Oven is dim and shows the WOW OVEN image, the control is likely in OFF/STANDBY mode. Press the I/O button to turn it on.
Details the limited warranty terms and conditions for Middleby Marshall equipment sold in the USA.
Outlines the warranty terms for Middleby Marshall ovens sold outside the United States.
Provides detailed dimensions, electrical, and gas specifications for the PS360G model.
Details dimensions, electrical, and gas specifications for the PS360GWB model.
Covers general safety, clearances, and code compliance for oven installation.
Information on connecting the oven to the electrical power supply.
Explains the functions of the oven's control panel keys and interface elements.
Details on starting the oven and adjusting basic operating parameters like temperature.
A guide to diagnosing and resolving common oven operational issues based on symptoms.
Lists common error messages displayed on the control panel and their corresponding remedies.
General| Model | PS360G Series |
|---|---|
| Category | Oven |
| Heating Capacity | Varies by model |
| Belt Speed | Adjustable |
| Dimensions (WxDxH) | Varies by model |
| Type | Conveyor |
| Power Source | Gas |
| Cooking Capacity | Varies by model |
To Next Page