1
Pause Mode
5.
6.
OPERATION INSTRUCTION
1) While in cooking state, if the door is opened and then closed, or if the " " pad
is pressed, the oven will enter Pause Mode.
2) While paused,the screen will display the remaining cooking time.
3) In Pause Mode, if the " " button is pressed, the oven shall immediately enter
Ready Mode; If the
" "button ，the oven will go into working mode.
End of Cook Cycle Mode
1) After the cooking time has expired, the oven shall go into the End of Cook Cycle
Mode. And the screen will display " DONE ".
2) If either User Option OP:11 or OP:12 is selected, the oven shall continue to sound until
opening the door or pressing the " "pad; If User Option OP:10 is selected, after
the 3 seconds beep, the oven shall display "DONE". After the beep, "READY" will display
and the oven will enter Idle Mode without any operation for a period of time.
User Option Mode
This allows the user to change the configurations of the oven.
1) Open the oven door and press "2" pad for 5 seconds. The beep tone sounds once and enter the
User Option Mode.
2) The screen displays "OP: - -".
3) Press corresponding number button to enter related mode setting. (refer to Appendix A)
For example: to set the voice of the beep tone to medium. Press " 2 ", "OP:22" displays.
If you want to change it, keep pressing "2", the screen displays "OP:20", "OP:21","OP:22",
"OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
Note: a. During setting process, press " " to enter Door Open Mode. Close the door will
enter Ready Mode.
b. If " " button not pressed at the last step, the program cannot be saved but stay
at previous state.
7.
6
is pressed
To Next Page
Loading...
Need help?
General
