Need help?Do you have a question about the Midea 9V SERIES and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Type | Split System |
| Cooling Capacity | 9000 BTU/h |
| Noise Level (Indoor) | 24 dB |
| Operating Temperature (Cooling) | 17-43°C |
| Operating Temperature (Heating) | -7-24°C |
Instructions to prevent injury and property damage during operation and service.
Important warnings regarding installation, electrical work, and general handling.
Further warnings on installation, operation, power cable handling, and environmental factors.
Additional warnings concerning telephone use, product noise, water entry, and maintenance.
Warnings on installation location, handling, cleaning, and avoiding damage.
Warnings on filter maintenance, battery handling, and potential hazards from leaks.
Explains the process of removing air and moisture using a vacuum pump.
Step-by-step guide for air purging using a vacuum pump and gas leak check.
Detailed steps for safely pumping down the refrigerant system.
Procedure for re-purging the system with refrigerant after re-installation.
Procedure to balance refrigerant levels using the 2-way and 3-way valves.
Detailed procedure for evacuating the refrigeration system to remove moisture and air.
Procedure for charging the system with the correct amount of refrigerant.
Details compressor restart delay, current protection, and fan speed control protection.
Safety precautions regarding capacitors and electrical discharge during troubleshooting.
Lists error codes displayed on the indoor unit and their meanings.
Provides diagnostic steps and solutions for specific error codes.
Steps to diagnose and resolve the E1 EEPROM parameter error.
Diagnostic steps and solution for the E2 Zero-Crossing Error.
Diagnostic steps for the E3 indoor fan speed out of control error.
Further diagnosis for E3 error, checking fan rotation and connections.
To Next Page