5
MAINTENANCE
Never clean the product with
any abrasive tool or solvent.
Clean with detergent and wipe
dry with cloth immediately.
Never dismantle the product
or attempt to make any
modification. Regular check
and cleaning of the product is
recommended for prolonging
its lifespan.
Make sure power supply is
disconnected before cleaning
the product.
Never wash the unit in water.
For cleaning, remove
components (water tank,
honeycomb filter, etc.) and
clean them with water and soft
brush. Allow them to air-dry
before re-assembling.
TROUBLESHOOTING
In case the product cannot be operated normally after installation, checks shall be
made for items described bellow:
1. Power cable unplugged or faulty contact.
2. Honeycomb filter assembly not properly installed.
3. Power Switch on the back of product or in the display panel not switched on.
If product remains dysfunctional after checking, a local dealer shall be sought for
assistance.
Per fig.2 fig.3 fig.4 and fig.5: Unplug the unit for two minutes, take out filter,
filter frame, honey comb filter and water tank seperately, wash them with
detergent and soft brush, then put them back to the unit. Cleaning once a
month is recommended.
Fig.3 Fig.4 Fig.5
Take out the honey comb filter
Take out the
filter frame
Take out the dust filter
CLEAN
To Previous Page
Loading...
