airy.
Baking programme 6: Ultr-fast
kneading, rise and baking in a very fast way. But the baked bread is the most rough
among all bread menus.
Baking programme 7: Dessert
For baking desert
Baking programme 8:Pasta
For preparing noodle dough. In this program no baking is done.
Baking programme 9: Dough
For preparing noodle dough. In this program no baking is done.
Programme 10: Jam
For making jam.
Baking programme 11: Cake
Kneading, rise and baking to make cake.
Programme 12: Bake
For additional baking of bread that are too light or not baked through. In this
programme there is no kneading or resting. The bread will be kept warm for nearly an
hour after the end of the baking operation. This prevents the bread from becoming too
moist.
Programme 13: Yoghourt
For Making youghourt
• To prematurely terminate this function press the “ Start/Stop” button for 2 seconds,
until one long acoustic signals are heard. To switch off the appliance, disconnect the
appliance from the power supply.
In programs 1, 2, 3, 4, 5 and 6, hurried acoustic signal sounds during the program
time table. Soon thereafter, add the ingredients such as fruits or nuts.
If you have set the delayed timer, you can put all the ingredients into the bread pan
at the beginning. In this case, however, fruits and nuts should be cut into smaller
pieces.
8.Setting the Time
The timer function enables delayed baking.
If you want the appliance do not start working immediately you can use this button to
set the delay time.
You must decide how long it will be before your bread is ready by pressing the “Time
+”. Please note the delay time should include the baking time of programme. That is,
at the completion of delay time, there is hot bread can be serviced. At first the
programme and degree of browning must be selected, then pressing “Time+” to
To Next Page
Loading...
Need help?
General
