08
OPERATION INSTRUCTIONS
Function description
●
Startup/Standby, long press the on button, “ ” indicator lights up.
●
Touch this button to start/stop the swing.
●
Touch this button to switch the wind speed (cycles among level
1-2-3-•••-10-1-2).
●
●
Schedule to shut down in the power-on state, and schedule to start up in
the standby state.
Touch this button to set the timer (the display cycles among
0-1-2-•••-12-0h); 0h means that the timer is canceled.
●
Touch this button to switch the wind mode among normal, plasmacluster,
●
Filter replacement reminder icon; when the icon “ ”
needs to be replaced.
●
In AI smart wind mode, the indicator light “ ” is on, and the wind power
is automatically adjusted according to changes in ambient temperature.
●
This indicator light is on in sleep wind mode.Start the sleep wind function,
and the fan automatically adjusts the level according to the program; there
are three levels: 1, 2 and 3; you can adjust the level of the sleep wind by
pressing the wind speed button.
●
●
This indicator light is on in ion wind mode.
In this mode, plasmacluster is turned on, and level 1~10 wind has
plasmacluster.
●
●
●
This indicator light is “ ”.Long press the switch button for 3 seconds to
start matching or disconnect “ ”.
The lights are on, “ ” is connected.
The lights are blinking and the “ ” is disconnected or being connected.
●
Displays the wind speed level or set timer, and displays the temperature in
the wind mode.
Control Panel Operations
EN
To Next Page
Loading...
