Midea Blanc Pro Series User Manual

Information are displayed when the remote controller is power up.
Breeze Away display
Transmission Indicator
MODE display
TIMER ON display
FAN SPEED display
TIMER OFF display
Silence feature
display
ECO display
GEAR display
LOCK display
Horizontal louver
swing display
Vertical louver auto
swing display
TURBO mode display
Not available for
this unit
Temperature/Timer/Fan speed
display
Active clean feature display
Fresh feature display
Sleep mode display
Follow me feature display
Wireless control feature display
Low battery detection display(If flashes)
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actaul
operation, only the relative function signs are shown on the display window.
Remote Screen Indicators
Displays when LOCK feature
is activated.
Silence
LOW
MED
HIGH
AUTO
Lights up when remote
sends signal to indoor
unit
Displays selected fan speed:
Displays the current
including:
mode,
2%-20%
21%-40%
41%-60%
61%-80%
81%-100%
1%
This fan speed can not be
adjusted in AUTO or DRY
mode.
Displays when ECO
feature is activated
Displays when GEAR
feature is activated
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions.
Temperature range:
o
o
o
o
16-30 C //60-86 F
Timer setting range:
0-24 hours
Fan speed setting range:
AU -100%
This display is blank when
operating in FAN mode.
JJ
J
JJ
(20-28 C/68-82 F)
(Model dependent)
How to Use Basic Functions
ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
AUTO Mode
SETTING TEMPERATURE
The operating temperature range for units
is 16-30°C (60-86°F)/20-28 C(68-82 F).
You can increase or decrease the set
temperature in 1°C (1°F) increments.
In AUTO mode, the unit will automatically select
the COOL, FAN, HEAT or DRY function based on
the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP button.
Set your desired temperature using the
TEMP or TEMP button.
3.
Press the ON/OFF button to start the unit.
Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can’t be set in AUTO mode.
COOL Mode
Swing
Boost
Clean
Swing
Boost
Clean
Basic operation
1. Press the MODE button to select COOL
mode.
2.
3.
Press
FAN button to select the fan speed
in a range of AU-100%.
4.
1
3
2
1
3
2
4
1
3
2
1. Press the MODE button to select AUTO.
Press the MODE button to select FAN mode.
2. Set your desired temperature using the TEMP
or TEMP button.
3.
Press the ON/OFF button to start the unit.
Press the ON/OFF button to start the unit.
Swing
Boost
Clean
Boost
Clean
Press FAN button to select the fan speed
in a range of AU-100%.
Set your desired temperature using the
TEMP or TEMP button.
Press the ON/OFF button to start the unit.
1. Press the
MODE button to select HEAT
mode.
2.
3.
Press
FAN button to select the fan speed
in a range of AU-100%.
4.
4
1
3
2
1
3
2
DRY Mode (dehumidifying)
NOTE: FAN SPEED cannot be changed in DRY
mode.
HEAT Mode
NOTE: As outdoor temperature drops, the
performance of your unit’s HEAT function may
be affected. In such instances, we recommend
using this air conditioner in conjunction with
other heating appliances.
FAN Mode
1.
2.
3.
NOTE: You can’t set temperatur
e in FAN mode.
As a result, your remote control’s LCD screen
will not display temperature.
Boost
54

Midea Blanc Pro Series Specifications

General

Brand	Midea
Model	Blanc Pro Series
Category	Air Conditioner
Language	English