Instructions for use
Function selection
Connecting the power and switching on
Power adjustment
After pressing the “ON/OFF” key, the induction cooker
enters into manual cooking mode.
After pressing the “ON/OFF” key, if no proper vessel is placed on the
cooker plate, the induction cooker will not heat up and the alarm will
sound to indicate that a vessel is required. After one minute later it will
switch off automatically.
After switching on the appliance, press the corresponding cooking
buttons to enter the desired cooking mode.
Please refer to “Functional cooking mode instructions” for the details
of the corresponding heating process for each cooking mode.
After selecting a mode, you can press “+” or “-” to adjust
the power.
For some modes, during the heating procedure, the
induction cooker can automatically adjust the power
according to the cooking requirement.
For certain modes, the power is restricted complying
with the cooking requirement.
Timer adjustment
If timer function is not activated, the induction cooker
will heat the ingredients for the default time duration.
If timer is needed, first press the “Timer” key. When
the numbers blink on the display, press the key “+” or
“-” to adjust the time duration.
When the adjustment is finished, the number on the display
will be shown after blinking for several seconds. The induction
cooker starts counting down.
When the counting down is over, the induction cooker automatically
stops heating and switches off.
Special notice: Please read the corresponding instruction
manual for each specific induction cooker purchased.
7
Timer
To Next Page
Loading...
Need help?
General
