Midea CR034-RG36F Remote Control Manual

5 6
Function Buttons
TIMER ON/OFF Button
INTELLIGENT EYE Button
8
Push this button to decrease temperature
setting or to decrease Hour for Timer setting.
UP Button ( )
Push this button to increase temperature
settings or to increase Hour for Timer setting.
DOWN Button ( )
9
-
+
12
13
10
11
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN SPEED Button
O
SILENCE/FP (8 C Heating) Button
Press this button to initiate the Auto-On /
Auto-Off time sequence. Each press will
increase the auto-timer setting by 30
minutes increments. When the setting
time displays 10H, each press will increase
the auto-timer setting by 60 minute
increments. To cancel the auto-timer
program, simply adjust the auto-on timer
to 0:0.
Press this button to initiate the INTELLIGENT
EYE Function. With the built-in infrared
sensor, the unit can detect the presence of
human in the room. If the unit detects no
human activity continuously for 30 minutes,
it will automatically enter standby (monitor)
status in order to save power consumption.
The unit will automatically start and resume
operation when human activity is sensed
again.
1
1
2
2
4
4
5
5
3
3
9
9
10
10
8
8
6
6
7
7
11
11
12
12
13
13
14
14
15
15
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON/OFF
INTEL LIGENT
EYE
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OF F
ON/OF F
SWING
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON/OFF
INTEL LIGENT
EYE
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
Press to activate/disable SILENCE function.
When the Silence function is activated, the
indoor unit will bring faint breeze, which
reduces noise to the lowest level and creates
a quiet and comfortable environment.
During heating operation (when the setting
mode is HEAT), by pressing this button for
O
more than 2 seconds, the FP (8 C Heating)
function is activated. The unit will operate at
O
a set temperature of 8 C. The LED display of
indoor unit will display ‘FP’. Pressing the
buttons ON/OFF, SLEEP, FP, MODE, FAN
SPEED, UP or DOWN while operating will
O
cancel the FP (8 C Heating) function.
14
15
LOCK Button
When you press the recessed LOCK button,
all current settings will be locked in and the
remote control will not accept any operation
except that of the LOCK. Press the recessed
LOCK button again to cancel the LOCK mode.
LED/FOLLOW ME Button
Press to disable/activate indoor LED display.
When button is pressed for more than 2
seconds, the ‘FOLLOW ME’ function will be
activated. Press again for more than 2
seconds again to disable the function.
7
When you press the recessed RESET button,
all current settings are cancelled and the
control will return to the initial settings.
RESET Button

Midea CR034-RG36F Specifications

General

Brand	Midea
Model	CR034-RG36F
Category	Air Conditioner
Language	English