13
14
Example:
TIMER ON TIMER OFF
(Off Start Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
To start the air conditioner 2 hours after setting,
and stop it 5 hours after setting.
1. Press the TIMER ON/OFF button to display
‘TIMER ON’.
2. Press the +/- button to display 2.0H on the
TIMER ON display.
3. Press the TIMER ON/OFF button to display
‘TIMER OFF’.
4. Press the +/- button to display 5.0H on the
TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The ‘TIMER
ON OFF’ indicator remains on and this function
is activated.
Off
Stop
Start
2 hours later
after setting
5 hours later
after setting
Set
NOTE
The TIMER ON or TIMER OFF that occurs in the
sequence directly after the set time will be activated
first. If the unit is off, it will first turn on. If the unit
is on, it will first turn off.
TIMER ON OFF
Pressing this button for less than 2 seconds will
initiate SLEEP function. If pressed for more
than 2 seconds, the FRESH function is initiated.
The sleep function enables the unit to
automatically increase (in cooling mode) or
O
decrease (in heating mode) 1 C per hour for
the first two hours, then hold the temperature
for the next 5 hours, after that the unit will stop
operation. This maintains the most comfortable
temperature and saves energy.
NOTE: The SLEEP function is only available in
COOLING, HEATING and AUTO operations.
When the FRESH function is initiated, the
IONIZER/PLASMA (depending on models) is
energized and will help to remove pollen and
impurities from the air.
1
3
2
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON/OFF
INTEL LIGENT
EYE
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
FP
TIMER
ON/OFF
INTEL LIGENT
EYE
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
LED/FOLLOW ME Function
Pressing the button for less than 2 seconds will
initiate LED function. If pressed for more than
2 seconds, the FOLLOW ME function is
initiated.
When the FOLLOW ME function is
activated, the displayed temperature on the
remote is the actual temperature at its
location. The remote control will send this
signal to the air conditioner at 3 minutes
intervals until the FOLLOW ME button is
pressed again.
The FOLLOW ME function is not available
under DRY and FAN mode.
Switching the operation mode or turning off
the unit will automatically cancel the
FOLLOW ME function.
Pressing the button for less than 2 seconds will
initiate TURBO function. If pressed for more
than 2 seconds, the SELF CLEAN function is
initiated.
TURBO function enables the unit to reach the
preset temperature in the shortest time. When
this button is pressed while in cooling mode,
the unit will blow strong cooling air with super
high fan speed. When this button is pressed
while in heating mode, the unit will bring fast
heating operation with super high fan speed.
Under SELF CLEAN mode, the air
conditioner will automatically clean and dry
the Evaporator and keep it fresh for the
next operation.
NOTE: The SELF CLEAN function is only
available in COOLING operation.
TURBO/SELF CLEAN Function
ON/OFF
ON/OFF
SLEEP/FRESH Function
1
3
2
To Previous Page
Loading...
Need help?
General
