Midea DayRelax XTXN25UV1B - Indoor Unit Installation Procedure (Continued); Mounting Plate Dimensions and Orientation

 Page 13 
Left rear wall
hole 65mm (2.5in)
Left rear wall
hole 65mm (2.5in)
Right rear wall
hole 65mm (2.5in)
Right rear wall
hole 65mm (2.5in)
Indoor unit
outline
Indoor unit
outline
39mm (1.5in)
39mm (1.5in)
285mm (11.2in)
285mm (11.2in)
47.1mm (1.85in)
39.2mm (1.54in)
39.2mm (1.54in)
47mm (1.85in)
47mm (1.85in)
47.1mm (1.85in)
W all
Indoor Outdoor
m
m7
-
5
(0.2-0.3in)
Fig.3.2
MOUNTING PLATE DIMENSIONS
Dierent models have dierent mounting plates.
In order to ensure that you have ample room to
mount the indoor unit, the diagrams to the right
show dierent types of mounting plates along
with the following dimensions:
• Width of mounting plate
• Height of mounting plate
• Width of indoor unit relative to plate
• Height of indoor unit relative to plate
• Recommended position of wall hole (both
to the left and right of mounting plate)
• Relative distances between screw holes
Indoor Unit
Installation
Fig. 3.2
Model B
Model A
Correct orientation of Mounting Plate
146.5mm(5.76in)
228.5mm(8.99in)
241mm(9.48in)
45mm(1.7in)
45mm(1.7in)
101.6mm(4in)
183.6mm(7.2in)
123.6mm(4.86in) 117.5mm(4.6in)
715mm(28in)
805mm(31.7in)
117.5mm(4.62in) 115.6mm(4.55in)
233.1mm(9.17in)
Left rear wall
hole 65mm (2.5in)
Right rear wall
hole 65mm (2.5in)
Indoor unit
outline
302mm (11.88in)
36.6mm (1.44in)
36.7mm (1.44in)
47mm (1.85in)
47.5mm (1.87in)
Model C
304.1mm(11.9in)
224.2mm(8.82in)
45mm(1.7in)
259.1mm(10.2in)
100.6mm(3.96in) 123.7mm(4.87in)
958.3mm(37.7in)
Left rear wall
hole 65mm (2.5in)
Right rear wall
hole 65mm (2.5in)
324.9mm (12.79in)
55mm (2.16in)
47mm (1.85in)
47mm (1.85in)
55mm (2.16in)
Model D
316.7mm(12.4in)
1037.6mm(40.85in)
271.7mm(10.69in)
291mm(11.45in)
246mm(9.68in)
45mm(1.77in)
45mm(1.77in)