Midea DLCSRAH24AAK User Manual

Specifications subject to change without notice.
DLCSRA
INSTALLATION INSTRUCTIONS
Outdoor Unit Ductless Split System − Sizes 09 to 36
NOTES:
Read the entire instruction manual before starting the installation.
Images are for illustration purposes only. Actual models may differ
slightly.
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS 2.............................
PARTS LIST 3...........................................
SYSTEM REQUIREMENTS 4...............................
WIRING 5...............................................
DIMENSIONS − OUTDOOR 6..............................
CLEARANCES − OUTDOOR 7.............................
INSTALLATION TIPS 8....................................
OUTDOOR UNIT INSTALLATION 8.........................
ELECTRICAL DATA 11...................................
CONNECTION DIAGRAMS 11.............................
SYSTEM VACUUM AND CHARGE 12.......................
START−UP 13............................................
TROUBLESHOOTING 13..................................

Midea DLCSRAH24AAK Specifications

General

Refrigerant	R410A
Weight (Outdoor Unit)	45 kg
Type	Split System
Power Supply	220-240V, 50Hz
Operating Temperature (Cooling)	18°C to 43°C
Operating Temperature (Heating)	-7°C to 24°C
Cooling Capacity	24000 BTU/h

Summary

SAFETY CONSIDERATIONS

Electrical Shock Hazard

Warning regarding potential severe injury or death from electrical shock during installation or service.

Explosion Hazard

Warning about potential explosion risk when using air or gases containing oxygen with refrigerants.

Equipment Damage Hazard

Caution about improper installation practices leading to equipment damage or malfunction.

WIRING

Wiring Equipment Damage Hazard

Cautionary notes on proper wire sizing and adherence to electrical codes.

Wiring Connections Hazard

Warning about secure wire connections to prevent overheating and potential fire hazards.

INSTALLATION TIPS

Refrigerant Piping Connections

Detailed steps for making secure refrigerant pipe connections to the outdoor unit.

INSTALL ALL POWER AND INTERCONNECTING WIRING TO OUTDOOR UNITS

Power and Interconnecting Wiring Steps

Wiring Installation Hazard

DRAIN CONNECTIONS

CONNECTION DIAGRAMS

SYSTEM VACUUM AND CHARGE

Unit Damage Hazard (Vacuum)

Vacuum Pump Procedure

Triple Evacuation Method

START-UP

TROUBLESHOOTING

Outdoor Unit Diagnostic Guides