Midea DLCSRAH36AAK

Specifications subject to change without notice.
DLCSRA
INSTALLATION INSTRUCTIONS
Outdoor Unit Ductless Split System − Sizes 09 to 36
NOTES:
Read the entire instruction manual before starting the installation.
Images are for illustration purposes only. Actual models may differ
slightly.
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS 2.............................
PARTS LIST 3...........................................
SYSTEM REQUIREMENTS 4...............................
WIRING 5...............................................
DIMENSIONS − OUTDOOR 6..............................
CLEARANCES − OUTDOOR 7.............................
INSTALLATION TIPS 8....................................
OUTDOOR UNIT INSTALLATION 8.........................
ELECTRICAL DATA 11...................................
CONNECTION DIAGRAMS 11.............................
SYSTEM VACUUM AND CHARGE 12.......................
START−UP 13............................................
TROUBLESHOOTING 13..................................

Midea DLCSRAH36AAK Specifications

General

Cooling Capacity (BTU)	36000
Refrigerant	R410A
Type	Split
Power Supply	220-240V, 50Hz
Operating Temperature (Cooling)	18-43°C

Summary

Safety Considerations

Electrical Shock Hazard Warning

Warning regarding electrical shock during installation, modification, or servicing of the system.

Explosion Hazard Warning

Warning about using air or gases containing oxygen for leak testing or operating refrigerant compressors.

Equipment Damage Hazard Caution

Caution concerning burying refrigerant pipe and potential for compressor damage due to refrigerant migration.

Wiring

Recommended Connection Method for Power and Communication Wiring

Guidance on connecting power and communication wiring between indoor and outdoor units, including wire sizing.

Install All Power and Interconnecting Wiring to Outdoor Units

Clearances - Outdoor

Electrical Data

Connection Diagrams

System Vacuum and Charge

Using Vacuum Pump

Triple Evacuation Method

Final Tubing Check

Start-Up

Test Operation

Troubleshooting