DLFSAB and DLFLAB: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
39
DISASSEMBLY INSTRUCTIONS (CONT.)
Electrical Parts (Anti-static gloves must be worn) (CONT.)
PROCEDURES ILLUSTRATION
4. Remove the 2 screws and 1 ground screw.
5. Unplug the plugs then remove the main control board
subassembly.
6. Release the data transfer module control board screw (1) and
remove the board.
7. Release the 2 screws then remove the transformer.
To Next Page
Loading...