Why is the water temperature from my Midea ECOHEAT sometimes hot then cold?
Unstable water pressure, excessively high outlet water temperature, or repeated activation of overheating protection can cause inconsistent water temperatures. To resolve this, lower the heating power and increase the water flow.
What to do if the heating indicator light is off and the water is cold on my Midea Water Heater?
Several factors could be responsible. First, check if the “TEMP” knob is turned off and rotate it if needed. Other potential causes include a PCB error (repair or replacement of the PCB is needed), water flow below 1.2L/min (adjust water flow), impurities clogging the flow sensor of the rotor (open the flow sensor and clean the rotor or change the flow sensor).
How to fix the ELCB indicator light when it's off on my Midea ECOHEAT?
The ELCB indicator light might be off due to a power supply error (check whether power is cut), a PCB error, occurrence of leakage current (contact authorized service personnel for repair), or no ground electrode or incorrect ground connection (make sure the grounding is reliable).
What to do if the heating indicator light is on but the water is cold in my Midea Water Heater?
This issue may arise if the thermal sensor has cut off the circuit (press the reset handle of the thermal sensor after checking and troubleshooting) or if the heating element is broken (change the heating element).
How to resolve no water flowing from my Midea ECOHEAT shower head?
The lack of water flow could be due to the running water supply being cut off (wait for restoration of running water supply) or the inlet valve of running water not being open (open the inlet valve of running water).
Why are the “EARTH”, “ELCB,” and “POWER” indicator lights flickering on my Midea Water Heater?
The flickering of the “EARTH”, “ELCB” and “POWER” indicator lights simultaneously indicates an occurrence of electrical current leakage. Contact authorized service personnel for repair.
Why can’t the pressure be increased on my Midea Water Heater?
The inability to increase pressure suggests a PUMP malfunction. Contact authorized service personnel for repair.
General| Brand | Midea |
|---|---|
| Model | ECOHEAT Series |
| Category | Water Heater |
| Language | English |
Covers installation, electrical connections, temperature, lightning, and maintenance guidelines.
Highlights the critical need for proper earthing (<4Ω) to prevent electric shock.
Detailed steps, connection diagram, and notes for performing ground resistance tests.
Lists key technical specifications including voltage, power, current, and dimensions for different models.
Identifies internal parts like control board, sensors, and external features like display and knob.
Presents internal electrical connection diagrams for both FP-67WTR380WMTH-B1 and WMTM-W1 models.
Detailed steps for removing the front plate, preparing the cord, and connecting it to terminals.
Steps for determining position, drilling holes, driving screws, and mounting the unit on the wall.
Instructions for installing the water valve with filter and connecting the shower hose.
Covers adjusting the knob, selecting a breaker, connecting wires, and filling the unit with water.
Instructions for turning on the unit, understanding indicators, and adjusting water temperature.
Details leakage testing, electrical protection, and overheating protection mechanisms.
Guides on adjusting water flow and activating the pump function for specific models.
Provides guidelines for proper placement, cleaning, and periodic checks for longevity.
Lists common symptoms, their causes, and suggested solutions for operational problems.
To Next Page