维修手册 Service Manual, 2017 v1.0
4 / 12
2. 整机拆卸 Dismantling of appliance
2.1 底盘拆卸 Remove the chassis
拧下索母，然后取下底盘。
Unscrew the cable and then remove the
chassis.
2.2 防护网、后壳拆卸 Remove protective net and rear shell
拆下防护网，松开并取出后壳 10 颗螺钉, 向后
壳方向用力拍，让前后壳扣位脱开。
Remove the protective net, loosen and take
out the 10 screws of the rear shell, and
pat hard in the direction of the rear shell
to release the buckle position of the front
and rear shell.
用螺丝刀取下固定风道的螺钉，然后取下风道
Use a screwdriver to remove the screw that
holds the air duct in place, then remove the air
duct.
To Next Page
Loading...
