Midea FZ10-21CR

维修手册 Service Manual, 2017 v1.0
9 / 12
3.8 底盘安装 The chassis to install
将底盘安装在机身上并旋紧索母
Install the chassis on the fuselage and tighten
the cable.
4. 常见故障及解决方法 Fault code and solutions
故障代码
Fault code
故障内容 Fault
content
显示 Display
维修方法步骤 Steps for maintenance methods
1、 不通电
No electricity
A、检查插座是否有电，如出现故障更换。
B、产品内部各部分故障：
B1、电路板故障：电路板损坏，插线脱落；
B2、内部接线故障：内部线断；
B3、电机故障：烧坏或热熔断器断路。
处理方法：分段检查，逐一排除找到原因后进行修理。
A、 Check whether the socket is charged or not.
B、 Failure in all parts of the product:
B1、Circuit board fault: the circuit board is damaged and the
plug wire falls off;
B2、Internal wiring failure: internal wiring is broken；
B3、Motor failure: burn out or heat fuse out.
Treatment: section inspection, one by one after elimination
to find the reason for repair
2、摇头运行不
良，卡顿，无法
摇头
Shaking your
head doesn't
work, katton.
You can't shake
your head
A、 同步电机是否损坏。
A. Whether the synchronous motor is damaged.