Service Manual_2020-V1.0
37
8.3 Sensor without terminal replacement
Defrost sensor in refrigerating chamber
Before remove the sensor, the refrigerating duct
assembly should be removed
Ambient temperature sensor
Sensor position in the upper of the box
The defrost sensor is located on top of the evaporator.
1） Disconnect the connector of defrost sensor
2） Cut off the band which fixes the sensor.
3） Separate the sensor and the evaporator.
*Don’t break the welding of the evaporator in case that
only the sensor needs to be replaced.
Sensor replacement guidelines
Cut off the damaged head of sensor.
To Next Page
Loading...
