Midea M thermal A Mono Series - 3 Error Code Table

M thermal Mono
202008 33
2.3 Digital Display Output
Table 4-2.5: Digital display output in different operating states
Outdoor unit state
Parameters displayed on hydronic
system DSP1
Parameters displayed on refrigerant
system DSP1
On standby 0 0
Normal operation Leaving water temperature (°C)
Running speed
of the compressor in
rotations per second
Error or protection Error or protection code Error or protection code
2.4 Modbus Function
Figure 4-2.6: Connection
Figure 4-2.7: Wiring
Unit
Wired controller Modbus
Max 16 units
Midea CAC
Confidential