Need help?Do you have a question about the Midea M2OA-18HRN1 and is the answer not in the manual?
General| Cooling Capacity | 18000 BTU/h |
|---|---|
| Heating Capacity | 18000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Type | Split System |
Describes the compact physical design of the indoor units.
Highlights product performance in energy efficiency and low noise levels.
Details design aspects of the single outdoor unit configuration.
Technical details for indoor units, including capacity, power, dimensions, and performance.
Technical details for outdoor units, covering capacity, power, compressor, and refrigerant.
Visual representation and measurements for indoor units (9K and 12K models).
Visual representation and measurements for outdoor units (18K/21K and 27K/30K models).
Defines the operating temperature ranges for cooling mode.
Defines the operating temperature ranges for heating mode.
Schematic illustrating electrical connections for the indoor unit.
Schematics showing electrical connections for outdoor units (1-drive-2 and 1-drive-3 systems).
Lists indoor unit failure phenomena and corresponding indicator status.
Lists outdoor unit failure phenomena and corresponding LED indicator status.
Specifies voltage, frequency, and ambient temperature requirements for electronic control.
Explains the meaning and function of various indicators on the display board.
Defines symbols and abbreviations for operational parameters and temperatures.
Describes general functions like remote receiving, testing, and alarms.
Details protection features for compressor, heat exchangers, and fan motors.
Explains compressor, fan actions, and anti-freezing control during cooling mode.
Describes compressor/fan actions and low room temperature protection in dehumidifying mode.
Details compressor/fan actions, including anti-cold wind function, during heating mode.
Outlines conditions and timing for defrosting operations in heating mode.
Explains automatic selection of cooling, fan-only, or heating modes.
Describes energy-saving adjustments in different operational modes.
Details outdoor fan speed control based on ambient temperature in cooling/heating modes.
Illustrated breakdown of parts for indoor units MSCI-09HRN1 and MSCI-12HRN1.
Illustrated breakdown of parts for outdoor units M2OA-18HRN1 and M2OA-21HRN1.
To Next Page