To Next PageTo Next PageWhy is my Midea MA100W85/WK/E Washer not draining properly?
If your Midea Washer is not draining water properly, ensure the water drain hose isn't placed too high or sealed in a pond. Also, check if the internal rubber ring of the drain valve is blocked by dirt. Ensure the water tap is opened.
What does E1 error mean on my Midea MA100W85/WK/E Washer?
If your Midea Washer displays the 'E1' alarm, it indicates an issue with water intaking. Check that the water tap is opened.
Why is my Midea Washer spinning abnormally?
If your Midea Washer is experiencing abnormal spin, ensure the door lid is closed and press the 'Start' button. If clothes are piled largely on one side of the barrel or excessively placed, manually balance them. If the washer isn't stable or is inclined, manually balance clothes. Also, check if the motor belt is loosened and balance clothes manually.
Why is no water flowing into my Midea MA100W85/WK/E Washer?
If your Midea Washer isn't taking in water, check if the water tap is opened. Also, verify if the power is off, the fuse is burned out, the water supply is cut off, or the water pressure is too low. Ensure the inlet hose is properly connected, and the filtering screen of the inlet valve isn't blocked by dirt. Additionally, check if the coil of the inlet valve is damaged or if the 'Start / Pause' button was pressed after the power switch.
What to do if my Midea MA100W85/WK/E shows an E3 error?
If your Midea Washer displays the 'E3' alarm, it means the lid wasn't closed before washing or spinning. To resolve this, close the lid and press the 'Start' button.
What does E2 error mean on Midea Washer?
If your Midea Washer displays the 'E2' alarm, it means the water drain hasn't finished. You should check the water level sensor and drain pump.
What does E4 error mean on my Midea MA100W85/WK/E Washer?
If your Midea Washer displays the 'E4' alarm, it indicates that washing is staying in the barrel. Manually balance the clothes at one side.
What to do if my Midea MA100W85/WK/E stops during operation?
If the Midea Washer doesn't start or stops during operation, first try to find a solution to the problem, if not, contact the service centre. Possible causes include a power outage or a burned-out fuse, a low power supply voltage, the water amount reaching the required level, or the washer being set to 'Delay' washing mode.
General| Loading Type | Front Load |
|---|---|
| Capacity | 10 kg |
| Spin Speed | 1400 rpm |
| Energy Rating | A+++ |
| Noise Level (Spinning) | 72 dB |
| Color | White |
Core safety guidelines to minimize risks like fire, electric shock, and property damage.
Precautions against electric shock, including proper earthing, indoor use, and avoiding humid areas.
Hazards related to children interacting with the machine and risks from flammable or explosive substances.
Warnings regarding safe product installation, transport, and handling to prevent appliance damage.
Guidelines for safe operation, including detergent use, hot water handling, and proper disposal.
Step-by-step guide for safely accessing and cleaning the drain pump filter.
Solutions for operational problems and a guide to error codes and their resolutions.
