Midea MAP06S1JWT-B User Manual

21
AUTO
COOL
DRY
HEAT
FAN
Transmission Indicator
Lights up when remote sends signal to unit
MODE display
Displays the current
mode, including:
TIMER ON display
Displays when
TIMER ON is set
TIMER OFF display
Displays when
TIMER OFF is set
Battery display
Low battery detection
SLEEP display
Displays when SLEEP
function is activated
FAN SPEED display
Displays selected FAN SPEED:
HIGH
MED
LOW
This display is blank when
set to AUTO speed.
Temperature/Timer display
Displays the set temperature by default, or timer setting
when using TIMER ON/OFF functions:
-Temperature range 60°F - 86 °F (16 °C - 30 °C)
- Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
COMFORTSENSE display
Indicates that the COMFORT
SENSE function is on
ON/OFF Indicator
Appears when the remote is enabled and can send a signal to the unit.
If you would like to turn the remote off without affecting the unit,
point the remote away from the unit and press the ON/OFF button.
To turn the remote on, point the remote away from the unit and press
The unit will not receive commands from the remote if this indicator is
not illuminated.
Information is displayed when the remote controller is powered up.
All indicators shown in the figure are for the purpose of clear presentation.
But during the actual operation, only the relative function signs are shown
on the display window.
Remote Screen Indicators
Note:

Midea MAP06S1JWT-B Specifications

General

Brand	Midea
Model	MAP06S1JWT-B
Category	Air Conditioner
Language	English