22
1
3
2
O N /O F F
T E MP
SH ORT
CU T
TI MER
ON
TI MER
OF F
MO DE
FAN
SL EEP
LE D
SETTING THE DESIRED TEMPERATURE
CHANGING THE MODE
1. The operating temperat
COOL operation
1. Press the MODE button to select cool mode.
2. Set your desired temperature using the Temp
or Temp button.
3. Press the FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
4. Press the ON/OFF button to start the unit.
ure range for this unit is 60°F-86°F
(16-30°C). You can increase or decrease the set temperature
in 1°F (1°C) increments by pressing the or buttons.
1. To change the operating mode, press the MODE button
until the desired mode appears on the remote’s display.
2. Set the desired temperature.
NOTICE
If the unit does not change when the button is pressed,
check that the ON/OFF indicator is illuminated. If it is not,
point the remote at the unit and press the ON/OFF button.
How to Use the Buttons
C-SENSE
C-SENSE
To Next Page
Loading...
Need help?
General
