Midea MAW06R1WWT - Electronic Control Operating Instructions; To Change Temperature Setting; To Adjust Fan Speeds

Page 11
Operating
Instructions
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control alone or with the remote controller.
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn
unit on or off.
TO CHANGE TEMPERATURE
SETTING:
Press Power button to turn unit
on or off.
NOTICE
The unit will automatically
initiate the Energy Saver
function under Cool, Dry, Auto
(only Auto-Cooling and Auto-
Fan) modes.
NOTICE
Press or hold either UP/DOWN
button until the
desired temperature is seen on
the display.
This temperature will be
automatically maintained
anywhere between 62°F (17°C)
and 86°F (30°C). If you want
to display the actual room
temperature, see To Operate on
Fan Only section.
TO ADJUST FAN SPEEDS:
Press to select the Fan Speed in four
steps-Auto, Low, Med or High.
Each time the button is pressed,
the fan speed mode is changed. On
Dry mode, the fan operates on Low
speed automatically.
UNIT CONTROL
DISPLAYS
TEMPERATURE
OR TIME OR
ERROR CODES
ADJUSTS
TEMPERATURE
OR TIME
ADJUSTS
TEMPERATURE
OR TIME
CHECK FILTER
RESET
BUTTON
ENERGY
SAVER MODE
SLEEP MODE
SETS FAN
SPEED
SET
COMFORT
SENSE
FEATURE
S MODE
ACTIVATES
TIMER
TURNS UNIT
ON OR OFF
Air Conditioner Features - MAW05R/MAW06R Models
Comfort
Sense