Midea EasyCool Window MAW06R1YWT User Manual

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

EasyCool Window

version A - 11 - 2018

MAW12S1YWT

MAW10S1YWT

MAW08S1YWT

MAW06R1YWT

MAW05R1YWT

MAW05M1YWT

midea.com

USER MANUAL

en

MAW

Warning notices: Before

using this product, please

read this manual carefully

and keep it for future

reference.

The design and

specifications are subject to

change without prior notice

for product improvement.

Consult with your dealer or

the manufacturer for details.

Frequency: 60Hz

Capacity: 5000 ~ 12000BTU/h

ow

US

ER MAN

U

A

L

0

00BTU

/h

version A - 11 - 2018 (PREVIEW03)

Table of Contents

Questions and Answers:

A
Anthony NguyenAug 15, 2025
Why does my Midea Air Conditioner not start?
- C
  Chelsea HouseAug 15, 2025
  Your Midea Air Conditioner might not start due to several reasons: The wall plug may be disconnected, so push it firmly into the wall outlet. A house fuse might be blown or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. The plug current device might be tripped, so press the RESET button. The control might be OFF, so turn the control ON and set it to the desired setting. The unit might have been turned off and on quickly, so turn it off and wait 3 minutes before restarting.
A
Andrew MooreAug 18, 2025
Why is the air from my Midea EasyCool Window MAW06R1YWT not cold enough?
- D
  david43Aug 18, 2025
  The air from your Midea Air Conditioner might not feel cold enough for a few reasons: If the room temperature is below 17°C (62°F), cooling may not occur until the room temperature rises above this level. If the temperature sensing element is touching the cold coil, straighten the tube away from the coil. Try resetting to a lower temperature. If the compressor shut off by changing modes, wait approximately 3 minutes and listen for the compressor to restart when set in the COOL mode.
E
Eric ChapmanAug 22, 2025
What to do if my Midea EasyCool Window MAW06R1YWT Air Conditioner is cooling, but the room is too warm and there is NO ice forming on the cooling coil?
- K
  kcollinsAug 22, 2025
  If your Midea Air Conditioner is cooling, but the room remains too warm without ice forming on the cooling coil, consider these possibilities: The air filter may be dirty, so clean it. The temperature might be set too high, so lower it. The air directional louvers may be positioned improperly, so adjust them for better air distribution. There might be obstructions blocking the front of the unit, so clear them. Doors or windows might be open allowing cold air to escape, so close them. If the unit was recently turned on in a hot room, allow additional time for it to remove stored heat.
J
Julian SmithAug 25, 2025
What to do if my Midea Air Conditioner is cooling, but the room is too warm and ice is forming on the cooling coil?
- F
  fryejenniferAug 25, 2025
  If your Midea Air Conditioner is cooling, but the room is too warm and ice is forming on the cooling coil, it could be due to several reasons: The outdoor temperature might be below 18°C (64°F). If so, set it to FAN ONLY mode to defrost the coil. The air filter may be dirty, so clean it and set it to FAN ONLY mode to defrost. The thermostat might be set too cold for night-time cooling, so set it to FAN ONLY mode to defrost the coil, then set the temperature to a higher setting.
O
Omar SavageAug 27, 2025
Why does my Midea EasyCool Window MAW06R1YWT Air Conditioner turn on and off rapidly?
- L
  ldorseyAug 28, 2025
  Your Midea Air Conditioner might be turning on and off rapidly because of a dirty air filter restricting airflow, so try cleaning the air filter. Another reason may be that the outside temperature is extremely hot, so set the FAN speed to a higher setting to bring air past the cooling coils more frequently.
T
Taylor GeorgeAug 30, 2025
Why is my Midea Air Conditioner making noise when cooling?
- K
  Kayla RobinsonAug 31, 2025
  The noise from your Midea Air Conditioner when cooling could be due to air movement sound. If it's too loud, set it to a slower FAN setting. It could also be window vibration due to poor installation. Refer to the installation instructions or check with the installer.

Midea EasyCool Window MAW06R1YWT Specifications

General

Type	Window Air Conditioner
Cooling Capacity	6, 000 BTU
Energy Efficiency Ratio (EER)	11.0
Voltage	115V
Noise Level	52 dB
EER	11.0
Coverage Area	Up to 250 sq. ft.
Fan Speeds	3
Power Supply	115V/60Hz
Refrigerant	R32
Installation Type	Window
Features	Remote Control
Control Type	Electronic
Operating Current	5.3A
Noise Level (Low/High)	52 dB

Related product manuals

Midea EasyCool Window MAW08S1YWT

Preview: Midea EasyCool Window MAW Series

Midea EasyCool Window MAW Series

Midea EasyCool Window MAW12S1YWT

Midea EasyCool Window MAW10S1YWT

Preview: Midea EasyCool MPF08CR81-E

Midea EasyCool MPF08CR81-E

Midea EasyCool MPF10CR81-E

Midea EasyCool MPF12CR81-E

Midea EasyCool MPF14CR81-E

Preview: EasyCool Portable MPF08CR71

EasyCool Portable MPF08CR71

Midea MDV-D140Q4/N1-E

Midea MV6-i400WV2GN1-E

Midea EL-KF70GW/Y-A(B)