Top view
Remove the factory installed 1/2″ screw and extend the Anti-Tip Brackets into the window track. Secure the Anti-Tip
Brackets by re-using the factory installed 1/2″ screw. Failing to use this screw could damage the air conditioner.
Top of Unit, Extend into Window Track
Use the thick window sash seal
foam to seal between the
windows, Check for Gaps
WARNING
You must extend the Anti-Tip Brackets into the Window Track Opening. Failure to follow this warning may cause
serious injury.
3.3 Use the included foam to seal any gaps between the window and the air conditioner.
Page 5
To Next Page
Loading...
