Page 19
Installation
Instructions
4. Install Air Conditioner – Install Video Time 4:36
A. Set the air conditioner on top of the support
bracket. Ensure the grooves on the bottom
of the air conditioner align with the Main
Supports. Using a level, check for proper tilt
towards the outside.
Fig. 12
WARNING
Do not leave the unit unattended
during installation.
This side faces indoors
Fig. 13
Fig. 11
WARNING
Failing to install the Open Window
Brackets could cause injury or
property damage.
C. Next, you must install the Open
Window Brackets using the
provided screws as shown.
Use the 1/2” Type B screw.
Use the 1/4”
Type B screw.
Fig. 14
B. Pull the window down into the slot
to help align the unit in the correct
location. Keep the window partially
inserted into the slot to maintain
alignment during installation. Fold
down both Side Arm Hinges.
To Next Page
Loading...
