Page 22
Installation
Instructions
The image below shows how the Anti-Tip Bracket is to be installed in the window track.
Note the Side Arm Foam was removed for illustration purposes only.
Fig. 20
E. Install a strip of Window Sealing Foam
to the bottom of your lower sash
sealing any small gaps between the
window and air conditioner. Then close
the window and check for gaps. Fill any
gaps with the included foam as needed.
F. Extend the Integrated Window Locks
(located in the U channel) until they
contact the window.
Fig. 22
Fig. 21
G. (Optional) To secure the lower sash in
place, attach the Window Sash Lock
with 1/2” Type A screws as shown.
Window Sash Lock
Window Sash Lock
To Next Page
Loading...
